Search found 9 matches

by squeege
Mon Oct 02, 2006 2:48 pm
Forum: Ask Our Pro's a Question
Topic: Milgard Classic vs Simonton 7500
Replies: 6
Views: 4664

dschuman, Milgard windows are not easy to pop open from the outside. When Milgard originally launched the positive action lock, there was a problem with the strike plate that caused them to redesign it. "Under certain circumstances" a person could pop the lock open from the outside, but th...
by squeege
Wed Sep 20, 2006 10:22 am
Forum: Ask Our Pro's a Question
Topic: Milgard Styleline vs Classic - Retrofit
Replies: 11
Views: 8319

dschuman, If you currently have wood trim around your windows, it should be easy for an installer to remove the wood trim and remove your existimg winows. The installer could then follow the AAMA 2400 guidelines to reflash your windows and keep your existing weather resistant barrier intact, as well...
by squeege
Tue Sep 19, 2006 11:11 am
Forum: Ask Our Pro's a Question
Topic: Retrofit Instillations
Replies: 2
Views: 3165

dschuman, Your contractor is correct about the Milgard windows not being able to be foam filled. Milgard does not have that capability and doesn't have plans to add that to their product offering anytime in the near future. As for installation guides, ask your dealer to provide you with the AAMA ins...
by squeege
Tue Sep 19, 2006 11:03 am
Forum: Ask Our Pro's a Question
Topic: Milgard Styleline vs Classic - Retrofit
Replies: 11
Views: 8319

dschuman, There are many differences between the Classic and Styleline. Styleine is more energy efficient than Classic (.35 avg U-value vs. .38 avg. U-value) for starters. Here is a list of a few of the other differences. Styleline ----- Classic 2 7/8" Frame depth-----3 3/8" Frame depth Un...
by squeege
Fri Aug 25, 2006 5:58 pm
Forum: Ask Our Pro's a Question
Topic: Replacing windows in Kansas City, Missouri
Replies: 2
Views: 1788

pet575, Wow. Anytime I ever hear anyone say "water leak" I try to steer them away from doing it themselves. Aluminum windows have a tendency to leak at the mulls, due to their high expansion/contraction rate. Many sealants that were used on mull joints +/- 10 years ago can't keep up with t...
by squeege
Wed Aug 02, 2006 3:46 pm
Forum: Do It Yourself Questions
Topic: How to remove Milgard Classic Sliding Patio Door(only doors)
Replies: 3
Views: 8326

rangav, There really is no way to remove the fixed panel on the Classic door without damaging the perimeter frame of the door. Milgard uses a panel that snaps in and "locks" into position. Once they snap it into position they screw the fixed portion into the perimeter frame before they set...
by squeege
Thu Jul 13, 2006 6:29 pm
Forum: Ask Our Pro's a Question
Topic: Stickler for grids on the inside
Replies: 17
Views: 10650

Earwax,

I actually have never sold an IWC window. I have a friend that just went to work for them, and we both ised to sell against them. Also, you are correct on the lock. I don't understand what engineer/product designer thought that lock looked good.
by squeege
Wed Jul 12, 2006 4:47 pm
Forum: Ask Our Pro's a Question
Topic: Certainteed vs Milgard
Replies: 13
Views: 11560

Milgard uses a intercept spacer system that uses screws to fill the air/argon holes. One screw in the intercept spacer means an air fill. Two screws on opposing corners means an argon fill. I've never seen a way to tell if a sealed unit has argon, maybe one of the other guys on the board can help wi...
by squeege
Wed Jul 12, 2006 4:06 pm
Forum: Ask Our Pro's a Question
Topic: Stickler for grids on the inside
Replies: 17
Views: 10650

I'm in the Pacific Northwest, and there are quite a few companies that offer SDL's. The first three that come to mind are Weathervane, Jeld-Wen, and IWC. Visit your local retrofitter. They should be able to find a manufacturer that suits your needs. Good luck.