Discussion Board Forum for Vinyl Windows

fenex is correct about the welds, the gap at the bottom of the dbl frames is more common then most manufacturers admit. if your unhappy ask the install co to go to bat for you and ask schucco for credit to install new product in your house and be done already if the install co does not help maybe yo...

it sounds pretty simple what ever youy decide to install, if you go with a french door set make sure youhave that threshold level and you shim correctly above the hingesif it fits I like to use little half inch plywood blocks check the opening carefully for, twist,plumetc. they all can cause time es...

Im curious where your taking your measurments from on the exterior, what type of trim exists brickmould etc. on the inside you can use 3 1/4 casing that helps especially with the header, what is the finish on the interior, sheetrock, plywood, plaster,

if by starter strip your refering to sill expander it is installed after the installation which should be in your instructions you have to cut it to height to fill in the space on the bottom of the window and insulate behind it, unlees you ordered the windows to big or did not shim the bottom or you...

Im not sure where your located or what you are talking about but if your refering to a vinyl nail finn on the exterior of the window and your not installing the window as a new constructiuon than your using the wrong window plus there are issues of thermal break when putting a window inside of any m...

anyone know a good place to buy aluminum c channel 5/16 by 2 1/8 various lenghts

why does the fixed unit have condensation on the exterior on certain days and the dbls do not, this is a triple pane unit,could there be a gas issue or a low e issue have had issue before and am looking for a good answer to give customers who find this result unexpected