Milgard Tuscany - Cutback

For all those Replacement Window decisions - just read, review or post a question. You will be helped!
Post Reply
Message
Author
Deckli
Posts: 3
Joined: Thu Aug 30, 2007 9:06 pm

Milgard Tuscany - Cutback

#1 Post by Deckli »

We have 2 x 4 construction and are concerned as to how much of our window sill will be left once the Milgard Tuscany windows are installed. We currently have Milgard Aluminum - which have a total depth of 2 1/4" It is our understanding that the Milgard Tuscany have a total depth of 3 1/4" Would I only loose about 1 inch, or more? ~ Linda
Top
User avatar
Windows on Washington
Posts: 4868
Joined: Wed Apr 04, 2007 11:21 pm
Location: DC Metropolitan Area-Maryland/Virginia/DC
Contact:
Contact Windows on Washington

Re: Milgard Tuscany - Cutback

#2 Post by Windows on Washington »

Deckli wrote:We have 2 x 4 construction and are concerned as to how much of our window sill will be left once the Milgard Tuscany windows are installed. We currently have Milgard Aluminum - which have a total depth of 2 1/4" It is our understanding that the Milgard Tuscany have a total depth of 3 1/4" Would I only loose about 1 inch, or more? ~ Linda
Your math is correct by my measurements but then again...it is early in the AM for me.
Top
utoo
Posts: 60
Joined: Tue Sep 12, 2006 1:20 pm

#3 Post by utoo »

We just finished a house like yours with the same windows. The cut back was 3/4"
Top
Post Reply

Return to “Ask Our Pro's a Question”