Abcleads.com BBB Business Review  NAHB member
Call us at
1-800-219-5332


All times are UTC - 5 hours




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: To bay or not to bay
PostPosted: Tue Oct 04, 2005 2:39 pm 

Joined: Tue Oct 04, 2005 2:24 pm
Posts: 1
Offline
I currently have a picture window flanked by double hung windows, approx 111 in.(W) by 53 in.(H). Ive had a couple of contractors out, 2 said no problem we can give you a bay window, and two had said its not possible without major carpentry because I do not have a header board and my soffit is only about 10 inches from the house.( oh and my walls are only of 2X3 construction) Any thoughts on that? I would love to have a bay, but I dont want problems or leakage, and Im not too sure about all that carpentry work(it really adds up) Additionally I would like your thoughts on Gorell and Alside windows. My third guy was home depot...forget him. My fourth guy has a brand I cannot find on the internet...Vinyl Lite, Aspey Series. Any Help would greatly be appreciated as I need to make a decision ASAP...Its getting cold out there..Thanks, family of 6 in the northern suburbs, IL


Top
 
 
 Post subject: Reply
PostPosted: Tue Oct 04, 2005 9:31 pm 

Joined: Fri Mar 11, 2005 3:43 pm
Posts: 353
Location: Illinois
Offline
Tough call without seeing the framing. Pull off your interior casing at the top and see if the structural header is continuous from end to end or split above each window. If it is split, you will need a new continous header installed across the entire span which means drywall/plaster repair as well as temporary support of the gravity load during construction. The 10" soffit is not a concern as some window manufacturers make bays and bows to spec. You are welcome, Fenex of 1 in the Northern suburbs, IL.


Top
 
 
 Post subject:
PostPosted: Wed Oct 05, 2005 7:41 am 

Joined: Mon Mar 28, 2005 9:22 pm
Posts: 301
Location: Peoria, IL
Offline
Can it be done?? of course. Will it take some extra construction work? yes. Is it worth the cost to have the look that you want? that's up to you. I know one thing. I don't particularly like the brands you named.
If I were you, I'd get ahold of fenex and let him come over and check it out for you.


Top
 
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Google [Bot], Yahoo [Bot] and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group