Abcleads.com BBB Business Review  NAHB member
Call us at
1-800-219-5332


All times are UTC - 5 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Full frame replacement windows for Kansas?
PostPosted: Wed Oct 19, 2005 12:40 am 

Joined: Wed Oct 19, 2005 12:26 am
Posts: 6
Location: Kansas
Offline
Like most consumers researching new windows I'm getting more confused not less! I have a 2500ft2 house with 21 main windows and 3 small windows. Most of our utility costs are heating in the winter, with only a few months cooling in the summer. Therefore winter comfort (and air penetration) are critical, as is condensation (or lack of it). Temperature swings are -20F to +100F, which raises concerns about the dimensional stability of the product, and its ability to not leak air or crack the water seals against the siding. Outdoor humidity is very low in winter (<10%) and high in summer (sometimes >80%). I'm also interested in maintenance free, and along with the humidity and driving rain makes me prefer something like vinyl or fibrex (hold that thought for now!). I don't like the idea of aluminium clad wood due to rot concerns. And wood is what I already have.

After reading this board the conclusion is that Renewal By Anderson is an over-priced medicore product. And they certainly want a lot for their install! But I'm not having much luck finding better windows with good installers in the Kansas City market. At least RBA in Kansas City is owned by Anderson, although I've read about some issues with Anderson Corporate customer service in general.

I'm going to try calling Schuco direct tomorrow. However is there any other good advice I should be considering or other brands AND installers, particularly in this market? Everything I've read indicates the installer matters at least as much as the actual product, and in some ways more.

If I can't get something reasonable, I may just stick with replacement windows and repairing the current frames. I have a good bid using Traco replacements.

Thanks for you time and comments.


Top
 
 
 Post subject:
PostPosted: Wed Oct 19, 2005 1:39 pm 

Joined: Wed Oct 19, 2005 12:26 am
Posts: 6
Location: Kansas
Offline
Schuco Corporate don't know if they have any distributors or installers in my area. I'm waiting a call back from their regional sales rep.

I've found a Milgard distributor and am now trying to find a good installer.

Any other suggestions appropriate for Kansas City area?


Top
 
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group