Abcleads.com BBB Business Review  NAHB member
Call us at
1-800-870-7321


All times are UTC - 5 hours




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Sash sizes
PostPosted: Wed Oct 26, 2011 6:04 am 

Joined: Wed Oct 26, 2011 5:58 am
Posts: 3
Offline
I just had my replacement window choice shot down by the Architectural Review Board of my neighborhood because the upper sash is "too wide." I measured it and it is 3 3/8," and this seems about the same as other windows. However, it is wide when compared to the old builder-installed aluminum windows that are in place now. Does anyone know of any narrower vinyl windows that are worth comparing with Sunrise (ones I wanted)? Yes, this is an odd question. . . Thanks!


Top
 
 
 Post subject: Re: Sash sizes
PostPosted: Wed Oct 26, 2011 6:22 am 
User avatar

Joined: Tue Feb 16, 2010 6:14 pm
Posts: 1756
Location: Milwaukee, Madison areas
Offline
It is not an odd question, however, it really stinks because Sunrise is about as narrow as you can get in a quality vinyl window. Unless you are in a hot climate, you'll want to stay away from aluminum, so you may check out fiberglass and see what they think of that.... Or, get on the condo board and get that ridiculous rule changed. :wink:


Top
 
 
 Post subject: Re: Sash sizes
PostPosted: Wed Oct 26, 2011 6:26 am 

Joined: Wed Oct 26, 2011 5:58 am
Posts: 3
Offline
Thanks! I think so too. Wouldn't have aluminum nor fiberglass if I have to paint it!


Top
 
 
 Post subject: Re: Sash sizes
PostPosted: Wed Oct 26, 2011 6:52 am 
User avatar

Joined: Wed Apr 04, 2007 11:21 pm
Posts: 3513
Location: DC Metropolitan Area-Maryland/Virginia/DC
Offline
HomeSealed wrote:
It is not an odd question, however, it really stinks because Sunrise is about as narrow as you can get in a quality vinyl window. Unless you are in a hot climate, you'll want to stay away from aluminum, so you may check out fiberglass and see what they think of that.... Or, get on the condo board and get that ridiculous rule changed. :wink:


+1

Sunrise Vanguard, Okna Insul-Tec, and Soft-Lite Bainbridge are all sub-3" profiles.


Top
 
 
 Post subject: Re: Sash sizes
PostPosted: Wed Oct 26, 2011 7:17 am 

Joined: Thu Jul 28, 2011 5:28 pm
Posts: 211
Offline
I'd ask the HOA for an approved window. We sell Sunrise which as has already been mentioned is among the lowest profiles available in a quality vinyl window. I would simply make them aware of this fact and also let them know that what they are doing with this stupid ruling is forcing the entire homeowner group to purchase aluminum windows which aren't the best in terms of energy efficiency.

It sounds to me as if you are the first homeowner who wants to replace their windows and they really don't understand anything about vinyl window profiles. If you have the Sunrise brochure, it shows a comparison to a thick framed vinyl window. I would show that to them and then tell them that rather than you bringing dozens of windows to them that they will surely reject, you want them to come up with an approved window that is also energy efficient and at a reasonable price and that's what you will go with. Tell them you think it's unfair that they are in essence forcing you to purchase a lower energy efficient window and that you will have to live with higher utility bills for many, many years because of their ignorance about windows.

It's worked for me before. :lol:


Top
 
 
 Post subject: Re: Sash sizes
PostPosted: Wed Oct 26, 2011 8:49 am 
User avatar

Joined: Tue Feb 16, 2010 6:14 pm
Posts: 1756
Location: Milwaukee, Madison areas
Offline
Eco makes some very good points. They may reconsider if you are able to present them with the options that are out there. Fiberglass will be pricey and need paint, and aluminum will definitely not be the most efficient choice, so it would seem unreasonable for them to mandate that. If they are presented with all of the facts, I don't see any reason why they would not allow a vinyl window. Most assoc's that we've worked with mandate colors and general appearance so that once everyone's windows have been replaced, they maintain uniformity. To expect them to look exactly like the original aluminum is just unreasonable,imo.


Top
 
 
 Post subject: Re: Sash sizes
PostPosted: Thu Oct 27, 2011 5:27 am 

Joined: Wed Oct 26, 2011 5:58 am
Posts: 3
Offline
Thank you all for your suggestions. They are excellent!


Top
 
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Google [Bot], Yahoo [Bot] and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group