What tool needed for screen adjustment on Sunrise patio door

For all those Replacement Window decisions - just read, review or post a question. You will be helped!
Post Reply
Message
Author
bgbrock
Posts: 36
Joined: Wed May 15, 2013 9:29 pm

What tool needed for screen adjustment on Sunrise patio door

#1 Post by bgbrock »

I can't seem to tell if it is a phillips head or flat screwdriver. It is very difficult to see in the threaded metal grommet at each corner of the screen.

Thanks for your help.

User avatar
Window4U (IL)
Posts: 1374
Joined: Fri Mar 11, 2005 3:58 pm
Location: Sales and Installation in Chicagoland and Central Illinois

Re: What tool needed for screen adjustment on Sunrise patio door

#2 Post by Window4U (IL) »

It's been a while since I adjusted one, but they were phillips screws. The screen hangs, so there are screw through the side hanging channel up top and screws through to the roller through the top of the bottom rail. You may have to adjust both depending what you're trying to do.

User avatar
Delaware Mike
Posts: 945
Joined: Mon Jan 30, 2006 1:32 pm
Location: Delaware, New Jersey, Philadephia Area

Re: What tool needed for screen adjustment on Sunrise patio door

#3 Post by Delaware Mike »

Dave is correct, phillips they are. Try adjusted them at the top first as the screen rides in the C-track. Hopefully you will not have to mess with the bottom.

Post Reply