Is it the contractor or the windows?

Post reviews of replacement windows
Post Reply
Message
Author
kanine
Posts: 4
Joined: Mon Aug 13, 2007 7:48 pm

Is it the contractor or the windows?

#1 Post by kanine » Mon Aug 13, 2007 8:04 pm

Stop me if you've heard this one before.... I had some earthwise windows installed about 4 months ago. There were 22 windows in all. Well, one of my bay windows has a window that is out of square. The upper "sash" is visably crooked when it's pushed up tight. The window won't lock either. To be honest there are a few other windows from the same manafacturer that are a little "tweaked".
Is this an indication of the installation or could that the quality of the windows isn't what I was led to believe.

Dan

#2 Post by Dan » Mon Aug 13, 2007 8:24 pm

Do you know which Earthwise Manufacturer the windows came from? I will make sure to put you in contact with the correct contact person to solve your problem.

kanine
Posts: 4
Joined: Mon Aug 13, 2007 7:48 pm

#3 Post by kanine » Mon Aug 13, 2007 8:29 pm

I believe the manafacturer to be C& S out of CT.

kanine
Posts: 4
Joined: Mon Aug 13, 2007 7:48 pm

#4 Post by kanine » Mon Aug 13, 2007 8:30 pm

Excuse my grammer ... manufacturer.

Dan

#5 Post by Dan » Mon Aug 13, 2007 8:34 pm

Send me your information at xxxxxxxxxxxxxxxxxx and I will contact one of the owners of C&S tomorrow.
Last edited by Dan on Wed Aug 15, 2007 6:51 am, edited 2 times in total.

kanine
Posts: 4
Joined: Mon Aug 13, 2007 7:48 pm

#6 Post by kanine » Mon Aug 13, 2007 8:38 pm

Dan wrote:Send me your information at dan@tri-statewholesale.com and I will contact one of the owners of C&S tomorrow.


Thank You.

Post Reply