Simonton Casement Window question....

For those self-installers
Post Reply
Message
Author
zeeman06
Posts: 2
Joined: Mon Mar 23, 2009 3:32 pm

Simonton Casement Window question....

#1 Post by zeeman06 » Mon Mar 23, 2009 5:39 pm

Hi to ALL....First time User here and First request for any help.

I have a Simonton Casement window which I have ordered a replacement glass/frame. This will simply put, replace the glass unit versus the entire casement frame,due to the seal going bad and now can hardly see through the glass due to bubbles. When I cranked out the window, the only items I saw which would be needed to do to remove the glass, is simply 3 points which look like to me are metal rings which hold the linkage on? Does anyone on the Forum recall,without my posting a picture, know even faintly what I am referring to?

Thanks ahead of time!! Enjoy reading all this Forum has to offer..!!

Regards,
Zeeman

zeeman06
Posts: 2
Joined: Mon Mar 23, 2009 3:32 pm

Re: Simonton Casement Window question....

#2 Post by zeeman06 » Tue Mar 24, 2009 7:55 pm

Forget this posting, since I figured it out without any help....:) Installed it today and all went well. Just 3 points where one has to pry off the existing linkage over a snapring and when ready to re-install? Just push the linkage arms back over the snaprings...!

Zeeman

Post Reply