PVC/Vinyl Trim?? Not really sure, but need replacement part

For those self-installers
Post Reply
Message
Author
gtwrangler
Posts: 1
Joined: Sat Mar 09, 2013 10:04 am

PVC/Vinyl Trim?? Not really sure, but need replacement part

#1 Post by gtwrangler »

Ok, not sure what this is, hence the pictures, but need to find a replacement part. Looked through a number of online catalogs, as well as the local big box stores, with little to no success.

Any help would be greatly appreciated
Attachments
IMG00467-20130113-1446.gif
This is what is should look like
(187.01 KiB) Downloaded 620 times
IMG00468-20130113-1447.gif
This is what my Wife's dog did, and continues to do.
(180.4 KiB) Downloaded 555 times

User avatar
Windows on Washington
Posts: 4850
Joined: Wed Apr 04, 2007 11:21 pm
Location: DC Metropolitan Area-Maryland/Virginia/DC
Contact:

Re: PVC/Vinyl Trim?? Not really sure, but need replacement part

#2 Post by Windows on Washington »

That is going to be fairly manufacturer specific.

It appears to be a piece of sill bullnosing or sill extension (depending on who you ask).

Try Stybuc and Blaine to start with:

- http://www.strybuc.com/
- http://www.blainewindow.com/index.php

You may want to call TrimQuik: http://www.trimquick.com/

Windowexpert
Posts: 2
Joined: Sun Mar 10, 2013 6:58 pm

Re: PVC/Vinyl Trim?? Not really sure, but need replacement part

#3 Post by Windowexpert »

It would be good if you could find who the mfg is. That flange piece is built into the bottom and most likely goes under the cement siding that you have similar to a J channel. If you can find the mfg there may be a parts schematic on line, that would give you a better idea of what your getting into. Good Luck

Post Reply