Brickmould 600 and vinyl siding trim

For those self-installers
Post Reply
Message
Author
golem
Posts: 20
Joined: Sun Nov 22, 2009 9:20 pm
Location: Maryland

Brickmould 600 and vinyl siding trim

#1 Post by golem » Tue Oct 19, 2010 9:30 pm

Going to be installing Monogram 46 around some Brickmould 600's. Should I expect to use the brickmould alone as the channel for the siding at the header and jams while at the sill an under-sill (or utility) trim would be used for attachment?

Thanks

User avatar
Windows on Washington
Posts: 4444
Joined: Wed Apr 04, 2007 11:21 pm
Location: DC Metropolitan Area-Maryland/Virginia/DC
Contact:

Re: Brickmould 600 and vinyl siding trim

#2 Post by Windows on Washington » Wed Oct 20, 2010 12:24 pm

The window should have an integrated J all the way around if I am not mistaken.

golem
Posts: 20
Joined: Sun Nov 22, 2009 9:20 pm
Location: Maryland

Re: Brickmould 600 and vinyl siding trim

#3 Post by golem » Wed Oct 20, 2010 1:53 pm

Windows on Washington wrote:The window should have an integrated J all the way around if I am not mistaken.
Thanks for the reply WoW, much appreciated!

Most likely you're correct. They do state in the window features list that for "Install Method" the standard feature is "Nailing Fin w/Brickmould J-Channel". Guess what threw me off is the schematic on their data sheet. It shows a simple 7/8" U-channel produced by the brickmould. Upon further thought, the 3/4" reveal on the clapboard siding added to the locking panels thickness will pretty much fill the 7/8" channel, wouldn't leave much room for any trim.

Post Reply