Abcleads.com BBB Business Review  NAHB member
Call us at
1-800-219-5332


All times are UTC - 5 hours




Post new topic Reply to topic  [ 21 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: VPI window - anyone heard of it?
PostPosted: Thu Dec 22, 2011 9:45 pm 

Joined: Thu Dec 22, 2011 6:33 pm
Posts: 2
Offline
Anthony, I searched VPI windows in Internet Explorer, didn't relaize this was old thread, thanks for update, I will post under window reviews, hopefully i can copy and paste my review.. Anyway don't know where you live but I live in Seattle area and would be happy to show you my windows inside my home.. I am machinist by trade..

Thanks anthony!!!

Terry


Top
 
 
 Post subject: Re: VPI window - anyone heard of it?
PostPosted: Thu Dec 22, 2011 11:21 pm 
User avatar

Joined: Tue Feb 16, 2010 6:14 pm
Posts: 1852
Location: Milwaukee, Madison areas
Offline
Fwiw, Milgard just shut down some major facilities and recently ceased serving a pretty large portion of the country due to financial troubles. I've always thought that they make a pretty solid mid-grade product, but given the circumstances, they would not be on my list of recommendations.


Top
 
 
 Post subject: Re: VPI window - anyone heard of it?
PostPosted: Fri Dec 23, 2011 1:26 pm 

Joined: Sun Feb 22, 2009 5:52 pm
Posts: 1383
Location: SE PA & NJ; CT
Offline
Terry,
Thx for your healthy additude.
Your observations and experienced are appreciated.


Top
 
 
 Post subject: Re: VPI window - anyone heard of it?
PostPosted: Fri Dec 23, 2011 1:58 pm 
User avatar

Joined: Mon Jan 30, 2006 1:32 pm
Posts: 637
Location: Delaware, New Jersey, Philadephia Area
Offline
[quote="TerryA"]Anthony, I searched VPI windows in Internet Explorer, didn't relaize this was old thread, thanks for update, I will post under window reviews, hopefully i can copy and paste my review.. Anyway don't know where you live but I live in Seattle area and would be happy to show you my windows inside my home.. I am machinist by trade..

Thanks anthony!!!

If you're a machinist by trade than I'd bet you would make a good window/door installer in a different life with all those tight tolerances. An assortment of pry bars and hammers are some guys micrometers..........


Top
 
 
 Post subject: Re: VPI window - anyone heard of it?
PostPosted: Thu Jan 05, 2012 3:16 pm 

Joined: Thu Jan 05, 2012 3:08 pm
Posts: 1
Location: Portland, OR
Offline
This response may be a bit overdue but I just found this forum. Our company has alot of experience with VPI windows. We have installed several thousand of them over the last two years and I must say that they are by far the best residential grade vinyl window company in the NW. We test on every project and these windows have never failed, in fact they consistently perform above spec. They have great customer service and stand by what they sell. They also have very good techincal knowledge when questions arise. There are more expensive windows with higher performance characteristics such as Innotech. But for the majority of low rise buildings VPI fits the bill.


Top
 
 
 Post subject: Re: VPI window - anyone heard of it?
PostPosted: Thu Jan 05, 2012 5:46 pm 
User avatar

Joined: Fri Mar 11, 2005 3:58 pm
Posts: 1333
Location: Northern & Central Illinois, Chicago suburbs
Offline
tmichie wrote:
This response may be a bit overdue but I just found this forum. Our company has alot of experience with VPI windows. We have installed several thousand of them over the last two years and I must say that they are by far the best residential grade vinyl window company in the NW. We test on every project and these windows have never failed, in fact they consistently perform above spec. They have great customer service and stand by what they sell. They also have very good techincal knowledge when questions arise. There are more expensive windows with higher performance characteristics such as Innotech. But for the majority of low rise buildings VPI fits the bill.


What do you test on every window job?


Top
 
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours


Who is online

Users browsing this forum: Google [Bot] and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group