Anyone heard of 7 D Industries?

For all those Replacement Window questions
Message
Author
pwindow1
Posts: 4
Joined: Tue Aug 02, 2011 3:16 pm

Re: Anyone heard of 7 D Industries?

#16 Post by pwindow1 » Fri Dec 23, 2011 11:49 am

The numbers I was told to refer to is the DP rating and the NFRC labels that were on the glass. The DP rating for the 7-D windows I have is a DP-50. I had option on what glass I wanted to use. The standard was a .31 U-value and a .36 solar heat gain. This package would have made them energystar windows. The package I got was a stimulus package that had a .29 U-value and a .26 solar heat gain. They also said they are AAMA certified witch means they have an outside party check their windows to make sure they are built they way they test. You can find out if your windows are AAMA certified by looking for a gold AAMA label. On my windows they are under the head. If I pull the top sash down and look up I can see them. With that being said I would say they are pretty credible.

User avatar
Delaware Mike
Posts: 859
Joined: Mon Jan 30, 2006 1:32 pm
Location: Delaware, New Jersey, Philadephia Area

Re: Anyone heard of 7 D Industries?

#17 Post by Delaware Mike » Fri Dec 23, 2011 12:34 pm

Next time I'm at this lumber yard I'll have them pull the sample, or at the least call the rep. I think that the bulk of their vinyl business goes to Ideal as they have full size displays. Your performance data looks okay. Do you know what the air leakage is?

pwindow1
Posts: 4
Joined: Tue Aug 02, 2011 3:16 pm

Re: Anyone heard of 7 D Industries?

#18 Post by pwindow1 » Wed Jan 04, 2012 4:05 pm

The only info I can find on air is .20 scfm /ft2

User avatar
HomeSealed
Posts: 2409
Joined: Tue Feb 16, 2010 6:14 pm
Location: Milwaukee, Madison areas
Contact:

Re: Anyone heard of 7 D Industries?

#19 Post by HomeSealed » Wed Jan 04, 2012 9:10 pm

I've seen a few good products in the teens, but an unproven product with.2 plus does not look good at all. All signs point to a mediocre product at best.

Post Reply