Abcleads.com BBB Business Review  NAHB member
Call us at
1-800-219-5332


All times are UTC - 5 hours




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Window recommendations for SF Bay Area/California
PostPosted: Sun May 06, 2012 1:50 am 

Joined: Sun May 06, 2012 1:40 am
Posts: 3
Offline
Hi,

First time poster, and have seen lots of very good info on this forum. Unfortunately, most of it, and what appears to be the most heavily recommended windows, all appear to be for the midwest and back east. Absolutely love what I see of the Sunrise windows, but they don't appear to be available anywhere west of Colorado. Same for Okna, Hi-Lite, etc.

With that in mind, is this really true? And if so, any suggestions on good quality alternatives to consider that are available in my area?

My project is 10 replacement windows of various shapes and sizes, plus a french door. most are single sliding, with 2 single hung, one double hung, and one 3 lite slider. I've had American Vision Windows come over, who basically push Anlin hard and seem pretty expensive and, worse, the windows appear very bulky. You lose lots of actual window with these. Have someone quoting Simonton 7300s right now and may ask about 9800s, but seems like all the names at the beginning of this post get the nod from folks here over the Simontons, so...

Any suggestions on better options that are actually available in my area?

Thx very much - open to installer referrals too.


Top
 
 
 Post subject: Re: Window recommendations for SF Bay Area/California
PostPosted: Sun May 06, 2012 8:05 am 
User avatar

Joined: Wed Apr 04, 2007 11:21 pm
Posts: 3678
Location: DC Metropolitan Area-Maryland/Virginia/DC
Offline
I am sure one of the other posters will give some feedback but on the West coast but Simonton is a decent window as is Milgard and I think many folks think highly of Amerimax too.


Top
 
 
 Post subject: Re: Window recommendations for SF Bay Area/California
PostPosted: Sun May 06, 2012 10:40 pm 

Joined: Sun May 06, 2012 1:40 am
Posts: 3
Offline
Thanks very much for the quick response, WoW. I take it from your response that you agree that most of the windows you and some others normally tout as the best simply aren't available on the West Coast?

I'm also assuming, but please correct me if I'm wrong, that you don't have any experience with Anlin windows? Fom what I've heard, they haven't extended their reach to the East Coast - they specifically focus on California, and now have extended into Arizona/Nevada. Haven't seen anything horrible written up about them, but they seem much bulkier than most other alternatives. I can't believe that they're the only guys to make a structurally sound vinyl window, but that's what the guy selling them would have you believe. And unfortunately, I hadn't done much research before he arrived and gave me the pitch. Since then however, It appears there are lots of good manufacturers (few for Cali though), and most appear to be able to make good quality windows without making them plastic heavy, glass light.


Top
 
 
 Post subject: Re: Window recommendations for SF Bay Area/California
PostPosted: Sun May 06, 2012 11:27 pm 
User avatar

Joined: Wed Apr 04, 2007 11:21 pm
Posts: 3678
Location: DC Metropolitan Area-Maryland/Virginia/DC
Offline
Not sure about Soft-Lite or Sunrise but HiMark and Okna are not out in CA yet.

Anlin appears to be well regarded.


Top
 
 
 Post subject: Re: Window recommendations for SF Bay Area/California
PostPosted: Mon May 07, 2012 6:16 am 
User avatar

Joined: Tue Feb 16, 2010 6:14 pm
Posts: 1852
Location: Milwaukee, Madison areas
Offline
+1, I don't believe that any of those are available out there at this time. I have not used Anlin , nor have I heard anything bad. My recommendation would be to compare the performance ratings... The only windows that I personally feel confident in recommending out there are the Simonton and Milgard.


Top
 
 
 Post subject: Re: Window recommendations for SF Bay Area/California
PostPosted: Mon May 07, 2012 1:57 pm 

Joined: Sun May 06, 2012 1:40 am
Posts: 3
Offline
Thanks to both of you - really appreciate the quick responses. My quote on Simonton 7300/7500 mix of products came in at ~60% of the Anlin/American Vision Windows install quote. The Simonton install would be done by a small couple person contractor company, but they've been in business for quite a while and have an A+ BBB rating and no web complaints.

So not sure about how much better or worse the Anlin windows are than Simonton, but if I assume both are quality windows, the install cost seems to be quite a bit out of whack. I'm getting other quotes to compare, using both windows.


Top
 
 
 Post subject: Re: Window recommendations for SF Bay Area/California
PostPosted: Mon May 07, 2012 4:38 pm 
User avatar

Joined: Tue Feb 16, 2010 6:14 pm
Posts: 1852
Location: Milwaukee, Madison areas
Offline
Its never a bad idea to get multiple quotes. Thats definitely the best way to gauge pricing in your area. :)


Top
 
 
 Post subject: Re: Window recommendations for SF Bay Area/California
PostPosted: Sat May 12, 2012 2:45 am 

Joined: Sat May 12, 2012 2:23 am
Posts: 1
Offline
How is your process coming? I'm in a similar situation and located in the bayarea. I've had milgard quoted (which I have since ruled out, not a fan after comparing to anlin or simonton) and two vendors quote simonton (bay area window pros and dial glass.) The simonton quotes were very comparable. I also had bay area window pros quote anlin and the price was only a few hundred more then simonton. I should mention I'm having two double hung and 2 casement windows quoted. Did you really get a quote for simonton that is 60 % less then anlin? Would you mind sharing the name of the installers? Any luck getting anymore anlin quotes? I have to admit I prefer the anlin windows, they look better built, nicer weld seems, better gaskets. Just my opinion.


Top
 
 
 Post subject: Re: Window recommendations for SF Bay Area/California
PostPosted: Sat May 12, 2012 8:50 am 

Joined: Wed Feb 01, 2012 9:14 pm
Posts: 398
Location: New Jersey Window Pro- Northern NJ and Central NJ
Offline
the one issue that stands out with Anlin is the fact that they are utilizing a Pocket Sill design. a pocket sill is an inferior design. basically lets water drain through the frame opposed to just the sill. the water goes through the frame and then theough weep holes..these weep holes get clogged and then how does the water drain? keep in mind as the water drains, it is carrying dirt and debris with it .
if you look at an older window withna pocket sill or a snap in sloped, you will always see black gunk in the corners due to clogging. very unsightly.
you want a welded sloped sill.


Top
 
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Google [Bot] and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group