Abcleads.com BBB Business Review  NAHB member
Call us at
1-800-219-5332


All times are UTC - 5 hours




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Thermal Weld vs Ultra Weld Polaris Windows
PostPosted: Fri Sep 28, 2012 2:06 pm 

Joined: Fri Sep 21, 2012 11:34 am
Posts: 6
Offline
Does anyone have any feelings about the Therma Weld vs Ultra Weld Polaris window? I know that the Ultra Weld is top of the line but do I really need it? Someone told me that they look "different" because they are "bulkier" or thicker. I don't think I'd like that.
I got a price on 2 Thermal Welds with XL glass (two coats low E) for $780. For standard, (one coat Low E) the price was $670 Includes grids, labor, taxes, etc....Would also throw in replacement of the cladding on my kitchen atrium door as it wasn't properly installed.
Price on two Ultra weld windows with the XL glass (2 coats Low E) was $920 ($810 with standard,(one coat Low E). The windows face west and really get alot of hot sun in the afternoons.
++


Top
 
 
 Post subject: Re: Thermal Weld vs Ultra Weld Polaris Windows
PostPosted: Sat Sep 29, 2012 7:49 am 
User avatar

Joined: Wed Apr 04, 2007 11:21 pm
Posts: 3708
Location: DC Metropolitan Area-Maryland/Virginia/DC
Offline
Where is the home located? That will tell you what the range on the Low-e you need is.

The ThermalWeld does have a slimmer line to it so if you are concerned about that thickness, that probably will be a deal breaker.

Both are good windows and solid performers. The UltraWeld is just better in its structural, thermal, and air infiltration performance.


Top
 
 
 Post subject: Re: Thermal Weld vs Ultra Weld Polaris Windows
PostPosted: Sat Sep 29, 2012 9:45 am 

Joined: Fri Sep 21, 2012 11:34 am
Posts: 6
Offline
I'm in central Indiana and the windows face W/SW.
Thank you.


Top
 
 
 Post subject: Re: Thermal Weld vs Ultra Weld Polaris Windows
PostPosted: Mon Oct 01, 2012 6:52 am 
User avatar

Joined: Wed Apr 04, 2007 11:21 pm
Posts: 3708
Location: DC Metropolitan Area-Maryland/Virginia/DC
Offline
Central Indiana is certainly a climate where you would benefit from some passive solar heating in the winter months. That being the case, I would rather see triple pane as compared to a lower SHGC rated double pane on those South facing windows.

If the triple pane option pushes the window price outside the budgetary range, stay with the double pane and normal Low-e range.

Standard Low-e is going to dramatically reduce the solar heat (basically more than cut it by 2/3rds) over what you have now already (assuming you don't have Low-e windows right now).

Let us know how it turns out.


Top
 
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Google [Bot], Yahoo [Bot] and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group