I can't seem to tell if it is a phillips head or flat screwdriver. It is very difficult to see in the threaded metal grommet at each corner of the screen.
Thanks for your help.
What tool needed for screen adjustment on Sunrise patio door
- Window4U (IL)
- Posts: 1374
- Joined: Fri Mar 11, 2005 3:58 pm
- Location: Sales and Installation in Chicagoland and Central Illinois
Re: What tool needed for screen adjustment on Sunrise patio door
It's been a while since I adjusted one, but they were phillips screws. The screen hangs, so there are screw through the side hanging channel up top and screws through to the roller through the top of the bottom rail. You may have to adjust both depending what you're trying to do.
- Delaware Mike
- Posts: 947
- Joined: Mon Jan 30, 2006 1:32 pm
- Location: Delaware, New Jersey, Philadephia Area
Re: What tool needed for screen adjustment on Sunrise patio door
Dave is correct, phillips they are. Try adjusted them at the top first as the screen rides in the C-track. Hopefully you will not have to mess with the bottom.
800-399-4623