Window Reinforcement

For all those Replacement Window questions
Post Reply
Message
Author
tmal14
Posts: 27
Joined: Tue Jul 10, 2012 1:34 pm

Window Reinforcement

#1 Post by tmal14 » Mon Jul 08, 2013 9:34 pm

I'm getting close to my decision btw the ultraweld, imperial LS and Sunrise brand windows.

5 of the windows I'm replacing are very large sliders at 47x65 (3 windows), and 58x72 (2 windows)

2 windows are DH and are 47x53

Due to the large window sizes do I need to worry about reinforcement? Or is it standard across the board for larger windows like mine.

In regards to the sunrise window there is a large mark up compared to the other two brands for the windows mentioned above. Could this be due to the smaller frame size sunrise has to have extra reinforcement compared to the other two brands. Dealer is emphasizing the better full frame reinforcement sunrise uses.

Would any of the windows have performance issues such as sagging, or be difficult to operate at the large sizes.

User avatar
HomeSealed
Posts: 2402
Joined: Tue Feb 16, 2010 6:14 pm
Location: Milwaukee, Madison areas
Contact:

Re: Window Reinforcement

#2 Post by HomeSealed » Mon Jul 08, 2013 9:52 pm

All 3 are high-end products and should serve you well. I would agree with your assessment of the Sunrise, that the reinforcement becomes more important due to the narrow sash frame profile. That said, reinforcement (on the dh's) would be money well spent on any of the three.
The will not be any problem with operation other than what you might expect from really large windows. They will be kind of heavy and bulky, but there is really no getting around that. Durability will not be an issue with a well-engineered product.

User avatar
Windows on Washington
Posts: 4396
Joined: Wed Apr 04, 2007 11:21 pm
Location: DC Metropolitan Area-Maryland/Virginia/DC
Contact:

Re: Window Reinforcement

#3 Post by Windows on Washington » Mon Jul 08, 2013 10:20 pm

Perfect advice from HomeSealed.

I wouldn't worry about it from the LS or the UltraWeld, but I would opt for it in Sunrise.

toddinmn
Posts: 477
Joined: Tue Apr 20, 2010 7:11 am

Re: Window Reinforcement

#4 Post by toddinmn » Wed Jul 10, 2013 12:20 am

I'd take the LS with reinforcement.
I'd have sliding windows fully supported at the sill or at least shim them every foot or so.

masterext
Posts: 685
Joined: Wed Feb 01, 2012 9:14 pm
Location: New Jersey Window Pro- Northern NJ and Central NJ

Re: Window Reinforcement

#5 Post by masterext » Wed Jul 10, 2013 3:39 pm

I'm in the reinforcement camp myself.

Post Reply