Call us at
1-800-219-5332
Contractors Join Our Network

Window Consumer Infomation

Abcleads.com BBB Business Review   Member of NAHB

Current Board Posts

  • Sunday December 14, 2014

    Single Picture/Single Hung Hybrid to Two Double Hungs

    How involved would it be for an installer to remove one large (approx.) 64X66 window that consists of a center single hung and...

  • Thursday December 11, 2014

    Thermal Industries vs Okna in WI

    Looking at getting some replacement windows in Waukesha, just outside of Milwaukee. I have a quote for Thermal Industries and one for Okna,...

  • Tuesday December 9, 2014

    Glass Breakage

    That would more than likely be a "stress" crack. Either wind or temperature caused a fault in the glass to become a crack....

  • Saturday December 6, 2014

    What is the best energy efficient window for Dallas Texas

    Hi,
    I live in the Dallas-Ft Worth Texas area and need to replace 5 arched windows in the front of my house which...

  • Wednesday December 3, 2014

    Window Replacement Options

    I posted this on another forum before I found this replacement window specific forum. I know some people there also post here,...

  • Tuesday December 2, 2014

    Another need help with windows choice, Vytex, vs Soft-Lite..

    So I was set on Sunrise Vanguard windows, but the only seller in town messed up my order twice and was somewhat more...

  • Wednesday November 26, 2014

    How do I make this window square?

    I just installed my first replacement OKNA window. I took my time, checked for plumb level and square (or so I thought). Everything...

  • Sunday November 23, 2014

    Replacement window over very thin aluminum frame

    I am installing my first vinyl replacement window over an aluminum frame (stucco wall). In all the instructional videos and the instructions that...

  • Saturday November 22, 2014

    Reynolds Vinyl Window

    I purchased Reynolds Vinyl Windows in 1996 and they have condensation in most of them. I was told to get the model number...

  • Thursday November 20, 2014

    Warranty question

    Do lifetime/double-lifetime warranties for the best vinyl manufacturers (like Okna) typically cover only the product or do they cover labor as well? For...

1 of 10

Do it Yourself- Replacement Window Video

 

ARCHIVED BOARD -
Please Visit our New Replacement Windows Board

 

 Go to Top  |  Go to Topic  |  Search   Newer Topic  |  Older Topic 

 quaker vs. atrium

Author: brandonmcox (---.dsl.ipltin.ameritech.net)
Date:   

Not wanting to go with Pella or Andersen because of cost, I have narrowed down my choices to quaker or atrium. Does anyone have any helpful info about either? I am using vinyl sliders, specifically.

Thanks.


 

 Re: quaker vs. atrium

Author: Pat (---.proxy.aol.com)
Date:   

I have no experience with atrum, but just had 19 quaker windows 2 of them sliders and a quaker atrium wood/vinyl clad door installed. priced at about 375 a window installed with low e, argon and aluminum coil wrapping around the exposed wood on the outside. I'm from st. louis and the quakers are made here in missouri...they've been in the window business for some 60 years and the window is not all that bad.

Let me know what you decide...by the way, my quakers are the pro edge.


 Threaded View   Newer Topic  |  Older Topic