Discussion Board Forum for Vinyl Windows

Its not uncommon to have mitered trim on the top, not as much on the bottom/sill. Most commonly (at least in this area), a brickmold bend gets mitered top corners where flat trim like yours is cut square. Your installer may be concerned about whatever the trim is being installed over, where he can p...

HomeSealed, my last question.

Is it possible to have mitered corners on the coil trim? The installer is coming to the house to do the work next week and in the discussion of work that needs to be done, he mentioned that mitered corners are not recommended. Is it true?

Thank you!

I received a quote for five Okna 500 double hung windows in the regular price bracket (sizes are about 32x54). In this forum and others, the ...

Thank you, HomeSealed!

The greatest challenge is to get the installers back. I have not been successful so far. They keep promising and never schedule. After a year of promises I guess I have to pay for the job that needed to be done in the first place.

+1. I'd add that there is some fudge in the way that the seals are designed so being slightly out of square probably won't affect performance (locking smoothly is a fair indicator), however it would be best to get corrected.

Thank you, WoW!

Will likely require cutting it loose and reinstallation of the window. Not a big deal and the window is more than capable of being uninstalled and reinstalled.

It is out of level. My question is this acceptable or the window has to be reinstalled? Will it affect window performance? How difficult would it be to remove caulk and coil and what about foam insulation? Does it have to be removed as well to reposition the window?

Thank you.

Again...being there is much better than pictures, but the window appears to be set slightly out of level.

Another one

These pictures are bigger

Pictures.

Take a pic on the inside with the sash about 1/4” lower than frame . One with lower sash raise a 1/4 above would help also.

It is double hung, OKNA. When opened and closed, the tolerances on both ends are different, like they are not leveled. here is the picture

Any pics? Casements can be adjusted (although that can be a bandaid if the frame is out of square). If they are double hungs and the reveals are off, the frame will need to be moved in all likelihood. Sorry, I'm sure that it says/shows which operator type you have, I didn't go back through all the p...