Okna 500 dx estimate

[Delaware Mike]

If the OKNA 500dx is a non-flanged replacement window it will be sized as a "slip" to fit in between your sheetrock jamb returns, thus the reason for the loss of the jamb return which is now housed by the insert/replacement window and most blind brackets up in the head return don't have enough "meat" to mount to. If a pro puts in a flanged OKNA 550dx it would be sized exactly the same as the window being removed and the installers most likely would have to only remove at most 5/16" to 3/8" of sheetrock, wood jamb extension, plus a wood stool rip or cut in place. That's how I do it, but I'm stubborn and like to make things hard for myself. We have never not been able to reinstall the blind brackets. We don't do this for the brick veneers as the cut back isn't needed nor is a slip method.

[indy500]

Mike, I wish you were closer to Indiana. Thank you for detailed explanation. Should I discuss installation process or fully trust the installer?

[HomeSealed]

Neither of the installs described are wrong, just different. The one that your contractor is explaining is the most common in this scenario. Mike's install is probably the best, most comprehensive way to do it, but you would see a significant increase in the price for that. At the end of the day its really up to you to weigh the pros and cons of that, however if you are already signed up with that contractor and the window order is placed, it would be too late to reconsider. A lot of companies only offer one type of install or the other.

[indy500]

I have not signed yet, have to go to the company's office to sign, request written warranties as recommended and pay.
This forum was very helpful in making decision on window brand. Thanks to all of you!

[HomeSealed]

I know that I speak for all when I say that we are happy to help.

I'd suggest discussing the install details and make sure that you get those in writing as well when you meet to sign the contract.

[indy500]

Question to HomeSealed:

What problems could develop within 5 years after window installation?
Did you experience or know any issues with Okna 500 windows?

Thank you!

[Windows on Washington]

Honestly, if its done right, you shouldn't have ANY issues. We have almost 20 years of installs right now and I can count on one hand (2 fingers actually) the number is issues that were defects of workmanship or product.

[indy500]

I just try to finalize all details before committing to the project. The other issue is the drywall return around windows is 3 inch now so it the depth of the builders grade window. Okna 500 unit is 4 inch depth and I would lose an inch around the window. I would not be able to reinstall the same blinds inside mount as the bracket size is 2.5.
I'd have to replace 7 blinds with narrower bracket if it is available or order custom made which adds to the total project cost. Is there any other window brand that would have slightly narrower depth with similar ratings?
I am not considering outside mount.

Thank you,

[masterext]

Virtually all replacement windows are now that depth.

[Delaware Mike]

All of these vinyl replacement/inserts are 3.25" in jamb depth. I've never seen one other than shoddy single-hung flanged new construction or some sort of weird mobile home window not 3.25".

[HomeSealed]

Question to HomeSealed:

What problems could develop within 5 years after window installation?
Did you experience or know any issues with Okna 500 windows?

Thank you!

As far as installation, its not uncommon for water leaks to show up later on down the road, especially from subpar installs that depend on only caulk to keep the opening water-tight. There are other things as well, trim work poorly done that pops loose, an incorrectly placed screw through the sill introducing water into your wall, exterior trim lapped over the drip cap instead of under it, and other things of that nature. A quality installation should present none of these issues, but a low cost install may be "the gift that keeps on giving" years later.