Search found 6 matches
- Thu Oct 20, 2011 1:30 pm
- Forum: Do It Yourself Questions
- Topic: Is my window too small for the opening?
- Replies: 2
- Views: 6022
Re: Is my window too small for the opening?
HomeSealed, thanks again, that's good to hear! Already got some OSI Quad caulking so I should be good to go.
- Thu Oct 20, 2011 12:02 pm
- Forum: Do It Yourself Questions
- Topic: Replacing 2 Single Hung Side-By-Side Windows
- Replies: 7
- Views: 13665
Re: Replacing 2 Single Hung Side-By-Side Windows
Yeah, it looks like the I should be able to cut out the center window fames. The rest is cosmetic trim. Thanks for your help!
- Thu Oct 20, 2011 11:20 am
- Forum: Do It Yourself Questions
- Topic: Is my window too small for the opening?
- Replies: 2
- Views: 6022
Is my window too small for the opening?
I have a 28" wide opening and the window is 27.5" (long story short it should have been 27.75"). The stops are 1/2" on each side so I should have 1/4" overlap but the groove around the window seems provide minimal overlap. Does the outside of the groove provide enough contac...
- Wed Oct 19, 2011 4:18 pm
- Forum: Do It Yourself Questions
- Topic: Replacing 2 Single Hung Side-By-Side Windows
- Replies: 7
- Views: 13665
Re: Replacing 2 Single Hung Side-By-Side Windows
Thanks HomeSealed for the reply! I'm a little confused about using the supplied screws & holes, it seems like they are long enough (according to the screws that came with another window) where they would go though the other window's frame and/or interfere if the screw holes are in the same locat...
- Wed Oct 19, 2011 12:44 pm
- Forum: Do It Yourself Questions
- Topic: Replacing 2 Single Hung Side-By-Side Windows
- Replies: 7
- Views: 13665
Replacing 2 Single Hung Side-By-Side Windows
I'm going to replace 2 side by side single hung windows. I realized they are only separated by the original windows frames, about 1.5" or so. I'm assuming if I replaced the windows with two dual hung I would need shorter screws and drill new pilot holes in one of the windows (assuming the holes...
- Thu Oct 06, 2011 4:01 pm
- Forum: Window Reviews
- Topic: Wincore 5400
- Replies: 15
- Views: 24689
Re: Wincore 5400
AmyT, what do you think of the Wincore 5400 windows? I'm looking into this window myself and am looking for opinions.
800-399-4623