I have a frame house with fin aluminum windows. The stucco around the windows is 3/4" thick around the window perimeter and is flush with the face of the window. The stucco recesses into all four sides of the frame about a half inch. The interior is 1/2 sheet rock butting the window. The existing frame is two inches wide.
How do I measure for vinyl replacements?
How do I remove the old window?
What will finish the joint between the stucco and the new window?
Can anyone help please
Stucco install options
-
- Posts: 25
- Joined: Tue Jul 13, 2010 2:11 pm
Re: Stucco install options
This is not a standard installation for a do it yourself job. Find a professional in your area that is familiar with aluminum removals in Stucco. You don't want to buy a high performance window and have an inadequate installation. I,m sure that there are homes in your area that have already been done. Perhaps you can get a referal from one of those.
-
- Posts: 1893
- Joined: Sun Feb 22, 2009 5:52 pm
- Location: SE PA & NJ; CT
- Contact:
Re: Stucco install options
Take a diamond blade cut a kerf around the window, then take a saws all and cut through the nailing fin , pull out the old , install the new, finish to taste.
800-399-4623