Going to be installing Monogram 46 around some Brickmould 600's. Should I expect to use the brickmould alone as the channel for the siding at the header and jams while at the sill an under-sill (or utility) trim would be used for attachment?
Thanks
Brickmould 600 and vinyl siding trim
- Windows on Washington
- Posts: 4868
- Joined: Wed Apr 04, 2007 11:21 pm
- Location: DC Metropolitan Area-Maryland/Virginia/DC
- Contact:
Re: Brickmould 600 and vinyl siding trim
The window should have an integrated J all the way around if I am not mistaken.
Re: Brickmould 600 and vinyl siding trim
Thanks for the reply WoW, much appreciated!Windows on Washington wrote:The window should have an integrated J all the way around if I am not mistaken.
Most likely you're correct. They do state in the window features list that for "Install Method" the standard feature is "Nailing Fin w/Brickmould J-Channel". Guess what threw me off is the schematic on their data sheet. It shows a simple 7/8" U-channel produced by the brickmould. Upon further thought, the 3/4" reveal on the clapboard siding added to the locking panels thickness will pretty much fill the 7/8" channel, wouldn't leave much room for any trim.
800-399-4623