I've heard it said a number of times that a window is only as good as it's installation.
So, what is a bad installation? Before I installed my windows I read up on the installation process from a number of sources and I asked some questions in this forum and others. As far as I can tell, I did a pretty good job, but there was no professional looking over my shoulder.
If you could list the top 2 or 3 things that make for a *bad* installation, what would they be?
My hope is that I won't see any of "me" in the list.
What's a "bad" installation?
- Windows on Washington
- Posts: 4868
- Joined: Wed Apr 04, 2007 11:21 pm
- Location: DC Metropolitan Area-Maryland/Virginia/DC
- Contact:
Re: What's a "bad" installation?
The first bad thing that would affect the performance of the window is not an "installation" issue but the proper measurement of the window.DerbyDad03 wrote:I've heard it said a number of times that a window is only as good as it's installation.
So, what is a bad installation? Before I installed my windows I read up on the installation process from a number of sources and I asked some questions in this forum and others. As far as I can tell, I did a pretty good job, but there was no professional looking over my shoulder.
If you could list the top 2 or 3 things that make for a *bad* installation, what would they be?
My hope is that I won't see any of "me" in the list.
I have seen it plenty of times and one of the worst examples just recently...
http://www.replacement-windows.com/wind ... php?t=2125
Getting beyond that, taking the time to properly square the window, seal, and insulate will all pay dividends on window performance. If you don't properly insulate (ie window frame perimeter, weight boxes, undersill, etc) the window will leak air from around the frame.
-
- Posts: 63
- Joined: Wed Aug 15, 2007 12:45 pm
W on W:
Thanks for the response, and the link to the horror story.
I do believe that I properly handled all of the items you mentioned, so I'm confident that my windows will perform as well as they should, and any issues won't be due to my installation process.
Three more to do in the spring and I'm done. Just need to decide if I want to replace the side-by-side casement in the kitchen with a single awning. I'm sure I'll figure that out by the time the snow goes away.
Thanks for the response, and the link to the horror story.
I do believe that I properly handled all of the items you mentioned, so I'm confident that my windows will perform as well as they should, and any issues won't be due to my installation process.
Three more to do in the spring and I'm done. Just need to decide if I want to replace the side-by-side casement in the kitchen with a single awning. I'm sure I'll figure that out by the time the snow goes away.
- Window4U (IL)
- Posts: 1374
- Joined: Fri Mar 11, 2005 3:58 pm
- Location: Sales and Installation in Chicagoland and Central Illinois
Re: What's a "bad" installation?
Here's a few examples for you. If you can't figure out why a photo is on here, just ask.DerbyDad03 wrote:I've heard it said a number of times that a window is only as good as it's installation.
So, what is a bad installation?
800-399-4623